Cali

enlarge model

enlarge detail

Schematic | Stitch Glossary

Yarn used ...

Cali is crocheted in Nostalgia™ with a floral belt crocheted in a matching Suede™.

(If you can’t open this PDF file you need Adobe Acrobat Reader. Get it here.)

Shown in size Small

SIZES

Directions are for women’s size Small.  Changes for sizes Medium, Large and X-Large are in parentheses.

FINISHED MEASUREMENTS

Bust (closed) – 36(40-44-48)”

Length – 24(24 1/2-25-25 1/2)”

MATERIALS

14(16-18-20) Balls BERROCO NOSTALGIA (50 grs), #6650 Chocolate Icing (MC) for Sweater

3 Balls BERROCO SUEDE (50 grs), #3717 Wild Bill Hickock (CC) for Belt

Crochet hook, size 5.50 mm (I) OR SIZE TO OBTAIN GAUGE

Tapestry needle

GAUGE

15 sc’s or dc’s = 4”;  10 rows = 4” in Pat St with MC on size 5.50 mm (I) hook

1 Flower measures 3 1/2” across with CC on size 5.50 mm (I) hook

TO SAVE TIME, TAKE TIME TO CHECK GAUGE

STITCH GLOSSARY

2 sc tog

Pull up a loop in the next 2 sts, yo and pull through all 3 loops on hook (1 sc dec’d)

2 dc tog

* Yo, pull up a loop in next st, yo and pull through 2 loops on hook, rep from * once more, yo and pull through all 3 loops on hook (1 dc dec’d)

3 dc tog

* Yo, pull up a loop in next st, yo and pull through 2 loops on hook, rep from * once more, yo and pull through all 4 loops on hook (2 dc’s dec’d)

BACK

With crochet hook, using MC, ch 69(76-83-91).

Row 1 (RS):  Sc in 2nd ch from hook and in each ch across – 68(75-82-90) sc’s.  Turn.

Row 2 (WS):  Ch 3, dc in front loop of each sc across – 68(75-82-90) dc’s.  Turn.

Row 3:  Ch 1, sc in each dc across.  Turn.  Rep Rows 2 and 3 for Pat St until piece measures 16 1/2” from beg, end on WS.  Turn.

Shape Armholes:  Row 1 (RS):  Sl st in first 5 dc’s, ch 1, sc in each sc across to last 5 dc’s – 58(65-72-80) sc’s.  Turn.

Row 2:  Ch 3, 2 dc tog, work to last 3 sc’s, 2 dc tog, dc in last sc – 56(63-70-78) dc’s.  Turn.

Row 3:  Ch 1, sc in each dc across.  Turn.  Rep Row 2 once more – 54(61-68-76) dc’s.  Turn.  Work even in Pat St until armholes measure 7(7 1/2-8-8 1/2)”, end on RS.  Turn.

Shape Shoulders:  Next Row (WS):  Sl st in first 5(6-6-7) sc’s, ch 1, sc in next 5(6-7-7) sc’s, hdc in next 6(6-7-8) sc’s, dc in next 22(25-28-32) sc’s, hdc in next 6(6-7-8) sc’s, sc in next 5(6-7-7) sc’s.  Fasten off.

LEFT FRONT

With crochet hook, using MC, ch 46(50-54-58).

Row 1 (RS):  Sc in 2nd ch from hook and in each ch across – 45(49-53-57) sc’s.  Work in Pat St same as back until piece measures 16 1/2”, end on WS.  Turn.

Shape Armhole:  Row 1 (RS):  Sl st in first 5 dc’s, ch 1, sc in each sc to end – 40(44-48-52) sc’s.  Turn.

Row 2:  Ch 3, work to last 3 sc’s, 2 dc tog, dc in last sc – 39(43-47-51) dc’s.  Turn.  Work 1 row even.  Rep Row 2 once more – 38(42-46-50) sc’s.  Work even in Pat St until armhole measures 5(5 1/2-6-6 1/2)”, end on WS.

Shape Neck:  Row 1 (RS):  Ch 1, sc in next 20(22-24-26) dc’s.  Turn.

Row 2:  Ch 3, 2 dc tog, dc in each sc to end – 19(21-23-25) dc’s.  Turn.

Row 3:  Ch 1, sc to last 3 dc’s, 2 sc tog, sc in last dc – 18(20-22-24) sc’s.  Rep Rows 2 and 3 once more – 16(18-20-22) sc’s.  Turn.  Work even in Pat St until armholes measure 7(7 1/2-8-8 1/2)”, end on RS.  Turn.

Shape Shoulder:  Next Row (WS):  Ch 2, hdc in first 6(6-7-8) sc’s, sc in next 5(6-7-7) sc’s.  Fasten off.

RIGHT FRONT

Work to correspond to left front, reversing all shaping.

SLEEVES

With crochet hook, using MC, ch 35(37-39-41).

Row 1 (RS):  Sc in 2nd ch from hook and in each sc across – 34(36-38-40) sc’s.  Turn.  Work even in Pat St until sleeve measures 1” from beg, end on WS.  Inc 1 st each end of next row, then every 3(3-2 1/2-2 1/2)” 5(5-6-6) times more, working incs into Pat St – 46(48-52-54) sts.  Work even until sleeve measures 18” from beg, end on WS.  Turn.

Shape Cap:  Row 1 (RS):  Sl st over first 5 dc’s, ch 1, sc in each dc across to last 5 dc’s – 36(38-42-44) sc’s.  Turn.

Row 2:  Ch 3, 3 dc tog, dc to last 4 sc’s, 3 dc tog, dc in last sc – 32(34-38-40) dc’s.  Turn.

Row 3:  Work even.  Rep the last 2 rows 4 times more, then rep Row 2 once more, end on WS – 12(14-18-20) dc’s.  Turn.

Last Row (RS):  Ch 1, 2 sc tog, sc to last 3 dc’s, 2 sc tog, sc in last dc.  Fasten off.

FINISHING

Sew shoulder seams.  Sew in sleeves.  Sew side and sleeve seams.

Edging:  Rnd 1: With RS facing, using crochet hook, join MC at right shoulder seam, ch 1, work in sc across back neck and along left front neck edge;  work 1 sc, ch 1, 1 sc in corner sp;  work in sc down left front edge working 1 sc in each sc row and 2 sc’s in each dc row;  work 1 sc, ch 1, 1 sc in corner sp;  work in sc along lower edge;  work 1 sc, ch 1, 1 sc in corner sp; work in sc up right front edge in same manner as left front edge;  work 1 sc, ch 1, 1 sc in corner sp; work in sc along right front neck edge, join with a sl st in first sc.  Turn.

Rnd 2:  With WS facing, ch 1, work 1 sc in each sc and ch-1 sp around, join with a sl st in first sc.  Fasten off.

Sleeve Edging:  Rnd 1:  With RS facing, using crochet hook, join MC at sleeve seam, ch 1, work in sc around lower edge of sleeve, join with a sl st in first sc.  Turn.

Rnd 2:  With WS facing, ch 1, work 1 sc in each sc around, join with a sl st in first sc.  Fasten off.

BELT

First Flower:  With crochet hook, using CC, ch 4, join with a sl st to form a ring.

Rnd 1:  Ch 1, (sc into ring, ch 3) 6 times, join with a sl st in 1st sc – 6 ch-3 spaces.

Rnd 2:  Ch 1, (1 sc, 1 hdc, 2 dc, 1 hdc, 1 sc) in each ch-3 space, join with a sl st in 1st sc – 6 petals made.

Rnd 3:  Ch 2, * 1 sc in back of petal of row below, ch 5, rep from * 5 times more, join with a sl st in 1st sc – 6 ch-5 spaces.

Rnd 4:  Ch 1, (1 sc, 1 hdc, 3 dc, 1 hdc, 1 sc) in each ch-5 space, join with a sl st in 1st sc – 6 more petals made.

Rnd 5:  Rep Rnd 3.

Rnd 6:  Ch 1, (1 sc, 1 hdc, 5 dc, 1 hdc, 1 sc) in each ch-5 space, join with a sl st in 1st sc.  Fasten off.

Second Flower:  Work same as first flower until Rnd 5 has been completed.

Rnd 6 (Joining Rnd):  Ch 1, (1 sc, 1 hdc, 5 dc, 1 hdc, 1 sc) in 1st ch-5 space, * (1 sc, 1 hdc, 2 dc) in next ch-5 space, holding WS of 2 flowers tog, sl st in space between 2nd and 3rd dc of petal on first flower, dc in same ch-5 space of second flower, sl st in space between 3rd and 4th dc of same petal on first flower, (2 dc, 1 hdc, 1 sc) in same ch-5 space of second flower, rep from * once more, complete rest of Rnd 6 same as first flower.  Fasten off.  Repeat second flower until belt is desired length (ours is 12 flowers long).