Tracy

Skill Level: 
Intermediate
Project Type: 
Women’s Clothing

This stunning turtleneck pullover features a panel of cable stitches and wide ribbing at the neck, cuffs and hem.

Shown in size Small


Sizes

Directions are for women’s size X-Small.  Changes for sizes Small, Medium, Large, 1X and 2X are in parentheses.


Finished Measurements

Bust – 32(36-40-44-48-52)”

Length – 23(23-23 1/2-24-24 1/2-25)”


Materials

14(15-17-20-22-25) Hanks Berroco Softwist (50 grs), #9412 Palmetto

Straight knitting needles, sizes 6 and 8 OR SIZE TO OBTAIN GAUGE

16” Length circular knitting needle, size 6

Cable needle (cn)

2 St markers

2 St holders


Gauge

20 sts = 4”;  28 rows = 4” in Textured Pat on size 8 needles

10 sts = 1 1/4”;  28 rows = 4” in Cable Pat A on size 8 needles

32 sts = 5 1/2”;  28 rows = 4” in Cable Pat B on size 8 needles

TO SAVE TIME, TAKE TIME TO CHECK GAUGE


Stitch Glossary

CF4

Sl 2 sts to cn and hold in FRONT, k2, then k2 from cn

CB4

Sl 2 sts to cn and hold in BACK, k2, then k2 from cn

RT4

Sl 2 sts to cn and hold in BACK, k2, then p2 from cn

LT4

Sl 2 sts to cn and hold in FRONT, p2, then k2 from cn


Textured Pat (Multiple of 4 sts + 1)

Row 1 (RS):  K1, * p3, k1, rep from * across.

Row 2:  Purl.

Row 3:  * P2, k1, p1, rep from * to last st, end p1.

Row 4:  Purl.

Rep these 4 rows for Textured Pat.


Cable Pattern A (Worked over 10 sts)

Row 1 (RS):  (P2, k2) twice, p2.

Row 2 and all WS rows:  (K2, p2) twice, k2.

Row 3:  P2, sl 4 sts to cn and hold in FRONT, k2, sl the 2 purl sts from cn back to LH needle, move cn to BACK of work;  p2 from LH needle, k2 from cn, then p2.

Rows 5 and 7:  Rep Row 1.

Row 8:  Rep Row 2.

Rep these 8 rows for Cable Pat A.


Cable Pattern B (Worked over 32 sts)

Row 1 (RS):  K2, p12, CF4, p12, k2.

Row 2 and all WS rows:  K the k sts and p the p sts as they face you.

Row 3:  K2, p10, CB4, CF4, p10, k2.

Row 5:  K2, p8, RT4, k4, LT4, p8, k2.

Row 7:  K2, p6, RT4, p2, CF4, p2, LT4, p6, k2.

Row 9:  K2, p4, CB4, p4, k4, p4, CF4, p4, k2.

Row 11:  K2, p2, RT4, LT4, p2, CF4, p2, RT4, LT4, p2, k2.

Row 13:  K2, p2, k2, p4, LT4, k4, RT4, p4, k2, p2, k2.

Row 15:  K2, p10, LT4, RT4, p10, k2.

Row 16:   Rep Row 2.

Rep these 16 rows for Cable Pat B.


Back

With smaller straight needles, cast on 98(110-118-130-138-150) sts.

Ribbing:  Row 1 (RS):  K2, * p2, k2, rep from * across.

Row 2:  P2, * k2, p2, rep from * across.  Rep these 2 rows until piece measures 3” from beg, end on RS.  Change to larger needles and p the next row, dec 17 sts evenly spaced across – 81(93-101-113-121-133) sts.  Work even in Textured Pat until piece measures 15” from beg, end on WS.

Shape Armholes:  Bind off 4(5-6-8-9-10) sts at beg of the next 2 rows – 73(83-89-97-103-113) sts.  Dec 1 st at each armhole edge every RS row 5(10-12-13-13-15) times – 63(63-65-71-77-83) sts.  Work even until armholes measure 7(7-7 1/2-8-8 1/2-9)”, end on WS.

Shape Neck and Shoulders:  Next Row (RS):  Bind off 5(5-4-5-6-7) sts, work until there are 16(16-18-20-22-24) sts on RH needle, sl center 21 sts onto holder, join another ball of yarn and work to end – 16(16-18-20-22-24) sts on one side and 21(21-22-25-28-31) sts on the other.  Working both sides at once, bind off 5(5-4-5-6-7) sts at beg of the next row, then 4(4-5-6-7-8) sts at beg of the next 4 rows.  AT THE SAME TIME, bind off 5 sts at each neck edge once, then 3 sts once.


Front

Work same as back until piece measures 3” from beg, end on RS – 98(110-118-130-138-150) sts.  Change to larger needles and p the next row, dec 4(8-8-4-4-8) sts evenly spaced across – 94(102-110-126-134-142) sts.

Establish Pat Sts:  Row 1 (RS):  Work Row 1 of Textured Pat over 21(25-29-37-41-45) sts, place marker, work Row 1 of Cable Pat A over 10 sts, work Row 1 of Cable Pat B over 32 sts, work Row 1 of Cable Pat A over 10 sts, place marker, work Row 1 of Textured Pat to end.

Row 2:  Work Row 2 of Textured Pat to first marker, work Row 2 of Cable Pat A over 10 sts, work Row  2 of Cable Pat B over 32 sts, work Row 2 of Cable Pat A over 10 sts, work Row 2 of Textured Pat to end.  Work even in pats as established until piece measures 15” from beg, end on WS.

Shape Armholes:  Bind off 4(5-6-8-9-10) sts at beg of the next 2 rows – 86(92-98-110-116-122) sts.  Dec 1 st at each armhole edge every RS row 6(9-10-14-13-14) times – 74(74-78-82-90-94) sts.  Work even until armholes measure 5 1/2(5 1/2-6-6 1/2-7-7 1/2)”, end on WS.

Note:  Due to the difference in gauges on the pattern stitches, the number of sts called for at the neck and shoulders of the front will not match those of the back.  The measurements will be the same.

Shape Neck:  Next Row (RS):  Work 19(19-21-23-27-29) sts, sl center 30 sts onto holder, join another ball of yarn and work to end.  Working both sides at once, bind off 3 sts at each neck edge twice, then dec 1 st at each neck edge every RS row 3 times.  AT THE SAME TIME, when armholes measure 7(7-7 1/2-8-8 1/2-9)”, bind off 5(5-5-5-7-7) sts at each armhole edge once, then 4(4-5-6-7-8) sts twice for shoulders.


Sleeves

With smaller straight needles, cast on 46 sts.  Work in ribbing same as back for 3 1/2”, end on WS decreasing 1 st at each end of the last row – 44 sts.  Change to larger needles.

Establish Pat Sts:  Row 1 (RS):  Work Row 1 of Textured Pat over 17 sts, place marker, work Row 1 of Cable Pat A over 10 sts, place marker, work Row 1 of Textured Pat to end.

Row 2:  Work Row 2 of Textured Pat to first marker, work Row 2 of Cable Pat A to next marker, work Row 2 of Textured Pat to end.  Work in pats as established, inc 1 st each side every 1 1/4(1 1/4-1-3/4-3/4-1/2)” 10(10-12-15-17-20) times, working incs into Textured Pat as sts become available – 64(64-68-74-78-84) sts.  Work even until sleeve measures 18” from beg, end on WS.

Shape Cap:  Bind off 4(5-6-8-9-10) sts at beg of the next 2 rows – 56(54-56-58-60-64) sts.  Dec 1 st each side every RS row 17(17-17-15-11-11) times, then every other RS row 0(0-0-1-3-3) times, end on WS – 22(20-22-26-32-36) sts.  Bind off 5(4-2-2-2-2) sts at beg of the next 2 rows, end on WS.  Bind off remaining 12(12-18-22-28-32) sts.


Finishing

Sew shoulder seams.

Neckband:  With RS facing, using circular needle, beg at left shoulder seam, pick up and k100 sts around entire neck, including sts on holders.  Mark for beg of rnd and carry marker up.  Work even in k2, p2 ribbing for 7”.  Bind off loosely in ribbing.  Sew in sleeves.  Sew side and sleeve seams.